The best combo with Pilot-RC PY-20AL servo!
Design features:
- Compact design, lateral connections for input & outputs
- Dual battery input design with automatic switching between batteries. Includes input voltage monitoring for low voltage warning and memory
- 4 independent outputs
- Plug and play. No soldering needed
- Support HV servos (7.4V), output voltage is switchable(5-7.4V);
- Includes “FSS-3” pin and flag failsafe switch with light status indicator
- Optional with heat sink with external cooling fan;
- Support up to 10pcs of 30kg digital servo (x4 direct, others through receiver)
- Can be used on up to 120cc aircraft.
Electrical Features:
- Linear regulator, no interference
- The input power uses simulated diode dual redundancy power supply
- Double MosFET output, independent linear control IC, high output current capability
- Low dropout design makes full use of the cell’s capacity, especially on HV mode
- Large heat sink, good heat dissipation and high overload capacity;
- Built-in MCU precisely controls FSS-3 and internal voltage;
- Fail safe design, ensuring Non-stop work
- SMT process, ensuring quality
- Input & Output ports all use high quality tantalum capacitors
Specification:
- Input voltage: DC5.3V -8.4V, MAX10V (2S LiPo)
- Output voltage: 5V, 6V, 7.4V (Switchable, Tolerance + 3%)
- Output current: DC 0 -15A (Vin-Vout =1V)
- Minimum differential voltage: < 0.3V
- Power effect: %0.3
- Voltage effect: %0.3
- Output ripple: < 2mV
- Size: 63mm x 32mm x 18mm
- Weight: 62g (including dual input wires)
