Pilot-RC already surprised everyone with a new level of precision and agility with our extremely popular Laser. We have now taken all these great features and grown them into our new Slick.
The Pilot-RC Slick, as well as looking great and offering color schemes designed by legendary Italian designer Mirco Pecorari at Aircraft Studio Design, it once again flys as good as it looks, and that is really saying something!
All the crazy agility and manoeuvrability of the Laser, while keeping the friendly flying characteristics of Pilot-RC planes, the new Slick offers an even further improvement in precision and aero musical performance, feeling like a larger plane, a larger plane that can go nuts!
Specifications:
| Model: | Slick – 103″ |
| Wingspan: | 103.8″ (2.638mm) |
| Length: | 102.1″ (2.594mm) with 4.5″ Spinner |
| Wing area: | 1,863 “² (12,020 cm²) |
| Weight: | 26.95lbs (12.2kg) |
VideoS:
GALLERY:
FEATURES:
NEW! Hybrid construction from wood and composite materials for specially reinforced fuselage and wings.
NEW! Patented quick assembly system for wings, stabilizer and SFG
NEW! Patented quick assembly system for canopy.
Genuine German Oracover (Ultracote) covering
Highly prefabricated, experienced builders can have air ready in under a day
Pre-installed hinges (glued and pinned)
Internally mounted cowling – so no visible external screws exposed (two exposed screws underneath for easy mounting)
Removable wings and stabs
Laser engraved motor mounting position
Easy canister installation due to open construction
Pull push system for Rudder servo
Included hardware:
Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
Pre-installed hinges and pre-mounted canopy
Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
Wheels, axels and wheel pants
Pre-prepared pull-pull wires and pushrods with ball links
Matching carbon spinner, 4.5″
CRASH KITS AVAILABLE FOR THIS MODEL:
- Landing gear repair package. Includes the wooden parts required to repair the damage often suffered around the landing gear area.
- Front fuselage repair package. Includes the wooden parts required to repair the damage often suffered around the front of the model
- Please note that additional or alternative spare wood outside of the above Packs is not available to order.
Required hardware:
Motor: 80-120cc or equivalent electric
Servos: 7-8 high torque (minimum 20kg) plus throttle // Uses x2 per aileron, x1 per elevator and x1 or x2 on rudder
Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.
Pilot-Rc recommended hardware:
- Servos: Pilot-Rc PW48AH (48Kg – 0,10s at 8,4v)
- Servo arms: Pilot-Rc 1,6″ Aluminium arms (included with Pilot-Rc servos)
- Wingbags: Pilot-RC wingbags
Colour schemes available:
Colour scheme Slick 01: Yellow, red and black
References: Oracover 21-023, 21-033, 21-091, 21- 071 / Ultracote HANU866, HANU872, HANU881, HANU874
Colour scheme Slick 02: Green and blue
References: Oracover 28-042, 21-053, 21-019 / Ultracote (royal green), HANU875, HANU905
Colour scheme Slick 03: Red, blue and carbon
Colour scheme Slick 04: Green, Grey and Red
Colour scheme Slick 05: Red, grey and yellow
Build information
COWL SIZE:
EXHAUST TUNNEL SIZE:
RUDDER HORNS AND PULL PULL LOCATION:
Extension wire lengths:
Throttle:
35cm
Each aileron:
25cm + 75cm
(nearest servo and furthest servo – to reach receiver direct)
Each elevator:
150cm
Rudder:
130cm
(when using direct – if installing pull pull, no required extension)
CENTER OF GRAVITY:
212mm
Measured back from leading edge of the wing at the fuselage.
You will find a laser engraved C.G. emblem on the inside of the fuselage, located close to the wing tube, which also shows the exact location for Center of Gravity.
FULL Build manual:
