Yak 55M Modified – 88″ (2.20m)

A few years ago the Yak 55M hit the stage big style in Rc.  Being a massively precise model, with some of the most axial rolls we have ever seen.  Pilot-RC always striving to go above and beyond in every aspect of our designs, have produced our own version of the Yak 55M Modified.

Even more precise than the standard version, but much more agile with truly over-sized control surfaces brings the agility that we all look for in a thorough bread acrobatic model such as this one.  Try it for yourself and you will see what we mean…


Model: Yak 55M Modified – 31%
Wingspan: 88″ (2.240mm) 
Length: 79″ (2.030mm)
Wing area: 1,543 “² (9,960 cm²)
Weight: 18,05lbs (8.2kg)






  • Strong yet light weight design, specially developed for precision acrobatic and extreme 3D flying
  • Specially designed wing with oversized ailerons
  • Genuine German Oracover (Ultracote) covering and printed colour schemes
  • Highly prefabricated, experienced builders can have air ready in under a day
  • Pre-installed hinges (glued and pinned)
  • Internally mounted cowling – so no external screws exposed
  • Large cowl with pre-cut air outlets
  • Fuselage tunnel to accept cannister installation easily
  • Removable rudder (as well as removable wings and stabs)
  • Laser engraved motor mounting position and multiple servo locations available for Rudder setup (pull pull or direct push pull)

Included hardware:

  • Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
  • Pre-installed hinges and pre-mounted canopy
  • Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
  • Wheels, axels and wheel pants
  • Pre-preared pull-pull wires and pushrods with ball links
  • Matching carbon spinner, 3.5″

Required hardware:

Motor: 50-60cc

Servos: 5 high torque (minimum 20kg) plus throttle // Uses x1 per aileron, x1 per elevator and x1 on rudder

Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.

Pilot-Rc recommended hardware:

Colour schemes available:


Colour scheme M55-01: 
References: Oracover 21-022, 21-071, 21-091, 21-033 / Ultracote HANU883, HANU874, HANU881, HANU872


Colour scheme M55-03: 
References: Oracover 21-057, 21-010, 21-091, 21-077, 21-022 / Ultracote HANU845, HANU870, HANU881, HANU846, HANU883

Colour scheme M55-06: 

References: Oracover 21-022, 21-010, 21-071, 21-091 / Ultracote HANU883, HANU870, HANU874, HANU881

Colour scheme M55-07: 

References: Oracover 21-043, 21-010, 21-071, 21-091 / Ultracote HANU903, HANU870, HANU874, HANU881

Build manual:



More photos available on the Pilot-RC facebook: www.facebook.com/pilotrcmodel