Yak 54 – 73″ (1.85m)

A classic for any style of acrobatics, from the Russian Yakovlev factory, the Yak 54 is one of the most instantly recognisable outlines in the sky at any club.

Its round fuselage provides some of the nicest roll manoeuvres imaginable and with our kit the same can be expected.  Designed for slightly more classic 3D, it can still perform all the manoeuvres yet not make the pilot a nervous wreck each time they try something new.  A carefully designed wing section and moderate control surfaces by todays standards make everything happen just that little bit slower, ideal for early 3D steps or if you just love low and slow just inches off the deck!


Model:Yak 54 – 26%
Wingspan:73″ (1.850mm)
Length:65.8″ (1.670mm)
Wing area:1,031 “² (6,652 cm²)
Weight:10.5lbs (4.8kg)

Video and GALLERY:


  • Strong yet light weight design, specially developed for precision acrobatic and 3D flying
  • Genuine German Oracover (Ultracote) covering
  • Highly prefabricated, experienced builders can have air ready in under a day
  • Pre-installed hinges (glued and pinned)
  • Internally mounted cowling – so no external screws exposed
  • Removable wings and stabs
  • Laser engraved motor mounting position

Included hardware:

  • Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and Yak style spats)
  • Pre-installed hinges and pre-mounted canopy
  • Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
  • Wheels, axels and wheel pants
  • Pre-preared pull-pull wires and pushrods with ball links
  • Matching carbon spinner

Required hardware:

Motor: 30-40cc or equivalent electric

Servos: 5 high torque (minimum 20kg) plus throttle // Uses x2 per aileron, x1 per elevator and x1 or x2 on rudder

Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.

Pilot-Rc recommended hardware:

Colour schemes available:

Colour scheme YAK-06: 
References: Oracover 21-057, 21-010, 21-036, 21-037/ Ultracote HANU845, HANU870, HANU842, HANU843

Colour scheme YAK-CH8: 
References: Oracover 21-057, 21-023, 21-091, 21-010 / Ultracote HANU845, HANU866, HANU881, HANU870

Colour scheme YAK-CH9: 
References: Oracover 21-022, 21-071, 21-091, 21-033 / Ultracote HANU883, HANU874, HANU881, HANU872

Colour scheme YAK-08: 

References: Oracover 21-019, 21-018, 21-071, 21-010, 21-091 / Ultracote HANU905, HANU904, HANU874, HANU870, HANU881

Build manual:


More photos available on the Pilot-RC facebook: www.facebook.com/pilotrcmodel