Pilot-Rc Extra’s are known for flying great, regardless of the version. This new almost entirely carbon reinforced version takes the design further than ever before. Strong, light and more rigid than ever before, this alone makes this plane a winner, but add the design tweaks and it becomes a showstopper!
Specifications:
| Model: | Extra 330Lx – 25% |
| Wingspan: | 78″ (1,980mm) |
| Length: | 74″ (1,833mm) |
| Wing area: | 1,131 “² (7,296 cm²) |
| Weight: | 12.98lbs (5.9kg) |
Video and GALLERY:
FEATURES:
- NEW! Hybrid construction from wood and composite materials for specially reinforced fuselage and wings.
- NEW! Patented quick assembly system for wings, stabilizer and SFG
- NEW! Patented quick assembly system for canopy. Especially useful for electric version, fast battery change!
- Genuine German Oracover (Ultracote) covering
- Highly prefabricated, experienced builders can have air ready in under a day
- Pre-installed hinges (glued and pinned)
- Internally mounted cowling – so no visible external screws exposed (two exposed screws underneath for easy mounting)
- Removable wings and stabs
- Laser engraved motor mounting position
- Easy canister installation due to open construction
- Pull pull system for Rudder servo
- Cowl fits both gasoline (single cylinder and twin cylinder) and electric motors
Included hardware:
- Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
- Pre-installed hinges and pre-mounted canopy
- Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
- Wheels, axels and wheel pants
- Pre-prepared pushrods with ball links
- Matching carbon spinner
REQUIRED HARDWARE:
Motor: 30-40cc or equivalent electric
Servos: 5 high torque (minimum 20kg) plus throttle // Uses x1 per aileron, x1 per elevator and x1 on rudder
Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.
PILOT-RC RECOMMENDED HARDWARE:
- Servos: Pilot-Rc PW20AH (20Kg – 0,14s at 8,4v)
- Servo arms: Pilot-Rc 1,6″ Aluminium arms (included with Pilot-Rc servos)
- Wingbags: Pilot-RC wingbags
Colour schemes available:
Colour scheme LX-01:
References: Oracover 21-010, 21-022, 21-033, 21-091, 21-071 / Ultracote HANU870, HANU883, HANU872, HANU881, HANU874
Colour scheme LX-09:
References: Oracover 21-043, 21-071, 21-010 / Ultracote HANU903, HANU874, HANU870
Colour scheme LX-10:
References: Oracover 21-023, 21-033, 21-071 / Ultracote HANU866, HANU872, HANU874
COLOUR SCHEMES AVAILABLE UNDER SPECIAL REQUEST:
Colour scheme LX-02:
References: Oracover 21-010, 21-050, 21-033, 21-091, 21-071 / Ultracote HANU870, HANU873, HANU872, HANU881, HANU874
Colour scheme LX-07:
References: Oracover 21-023, 21-071, 21-010 / Ultracote HANU866, HANU874, HANU870
Colour scheme LX-08:
References: Oracover 21-050, 21-071, 21-010 / Ultracote HANU873, HANU874, HANU870
Build information
COWL SIZE:
A: 262mm – B: 252mm – C: 221mm – D: 241mm
EXHAUST TUNNEL SIZE:
A: 532mm – B: 80mm – C: 532mm – D: 86mm – E: 125mm – F: mm
RUDDER HORNS AND PULL PULL LOCATION:
A: mm – B: mm – C: mm – D: n/a – E: 8.5mm
Extension wire lengths:
Throttle:
10cm
Each aileron:
12cm
(to reach receiver direct)
Each elevator:
60cm
Rudder:
Pull pull, no required extension
CENTER OF GRAVITY:
141mm
Measured back from leading edge of the wing at the fuselage.
You will find a laser engraved C.G. emblem on the inside of the fuselage, located close to the wing tube, which also shows the exact location for Center of Gravity.