107" 35% EXTRA330LX video from Alexander Balzer in Austria. many thanks for his great flight:
107" 35% EXTRA330LX release. Special design for competition. with big aileron and elevator. the wing and stab airfoil is much thin than EXTRA330SC
more photos: https://www.facebook.com/pg/pilotrcmodel/photos/?tab=album&album_id=1309125809146596
67" 23% EDGE540V3 release. Design for both 20cc gasoline engine and electric motor
more photos: https://www.facebook.com/media/set/?set=a.1314937158565461.1073741862.397985496927303&type=3
• Pilot-RC have electric package for sale, include one CC20/400KV motor, one 18*10 electric propeller, one 4500mah 6S 35C lipo battery, 4pcs Pilot-RC PY20AL 20kg.cm servos with AL servo arm.
contact with local dealer or email Tony(email@example.com) to buy.
67" 22% EXTRA330SC release. Design for both 20cc gasoline engine and electric motor
• Design for standard servo, two for aileron, one for elevator, one for rudder.
• Can use pull pull system or push pull system for rudder.
• Come with wing bag
• come with the servo extension wires
92" EDGE540V3 with Hamilton scheme release. design for DA70, DLE60 two cylinder engine and KCS62 engine.
107" EDGE540V3 with Hamilton scheme release:
Many thanks to Nicholas design this super great scheme. Many thanks to Hamilton! Many thanks to my luxemburg dealer JC to talk with Nicholas to get the permission!
it will be in stock in May. pls order from local dealer.
97" G650 release.Design for two 6-10kg(13-22LB) turbine or educt fan:
G650 jet comes with tail pipe,wing bag, Air Trap, pneumatic retract landing gear, five ways electronic valve for gear and gear door, two ways electronic valve for air brake. Factory prinstall nevigator LED lights , air brake and gear door. G650 cover by Oratex and paint scheme. the price is only 2799USD.
Turbine Ready version : factory prinstall 8pcs PY20AL servo , voltage regulatro, electronic valve, landing gear, gear door, navigator LED light, air brake, the price is only 3399USD.
PNP version : Factory prinstall two swiwin SW6(6kg) turbine, 8pcs PY20AL servo , voltage regulatro, electronic valve, landing gear, gear door, navigator LED light, air brake, the price is only 6599USD.
Email Tony to order it(firstname.lastname@example.org)
71" dolphin jet release!
Design for 6kg turbine. more detail. pls check :
Pilot-RC first balsa jet : Dolphin jet release!
Dolphin jet review on RCU, you can see the feeling from the final customer:
more pics: http://www.pilot-rc.com/GalleryClass.aspx?id=50&page=1
Design for 8-14kg turbine. Basla wood and Oracover(Ultracote) covering construction. Removable SFG included. Special design wing for jet beginner, easy to fly and land. Option for Navigation LED lights with programmer and Wiring. Option wing special design for sport flying. more sharp airfoil and more fast speed. you can use the same fuselage with two kind of wing.
• ARF version: airframe(standard wing or sport wing). with tail pipe, pneumatic retract gear with brake and hardware.
• TR(turbine ready) version: airframe with tail pipe, pneumatic retract landing gear with brake, 8pcs Pilot-RC PY-20AL servos, Three way Electronic Pneumatic for retract and brake valves, servo extension wire,Votage regulator(7.4V to 6V), Electric switch. preinstall the above items in factory.
Please contact with local dealer or email Tony(email@example.com) for order. dealer list: http://www.pilot-rc.com/Dealers.aspx
Pilot RC customer service: send you free wood part to repair your plane.
Damaged your Pilot-RC plane ? do worry about it. send the damaged plane photos to Tony, I will send you the precut wood then you can repair it. the precut wood is FREE. you only need to pay the shipping cost. if you want the precut Ultracote(oracover) covering, we will sell you at my cost. very low price. Email Tony if you need help.
see below from a chinese customer: